Nidac 1 Series Instruction Manual

Nidac 1 Series Instruction Manual Manual pdf 33 page image

30APPENDIX B: USER CODE PROGRAMMING SUMMARYThe factory default manager code is 1111.To enter manager mode press   (the final  is not required when using fixed length codes)The keypad will beep 5 times and the Mode LED will be flashing Green Using Regular MethodAdd a Standard User Code for Lock Control

 Add a Standard User Code for Auxiliary Lock Control      Add a Standard User Code for Lock & Auxiliary Lock Control      Add a Primary User Code for Lock Control     Add a Primary User Code for Auxiliary Lock Control       Add a Manager Code for Lock Control     Delete a code from a known location  Where  is a 3 digit location from 001 to 500Using Search MethodAdd a Standard User Code for Lock Control   Add a Standard User Code for Auxiliary Lock Control      Add a Standard User Code for Lock & Auxiliary Lock Control      Add a Primary User Code for Lock Control     

PreviousNext

/ 36

Related manuals for Nidac 1 Series

Nidac Presco VR43 Instructions Manual

Nidac Presco 2 Series Manual

Nidac PRESCO PRE Series User Manual

This manual is suitable for:

1 Series VST43 VST62

manualsdatabase

Your AI-powered manual search engine