29APPENDIX A: INSTALLER SETTING SUMMARYThe factory default installer code is 9999.To enter installer mode press (the final is not required when using fixed length codes)The keypad will beep 3 times and the Mode LED will alternately flash() Green/OrangeProgram installer settings using SettingNumber Function AllowedValuesDefaultValue901 Lock Relay Time 0-255 10902 Lock Relay Mode 0-1 0903 REX Input Mode 0-3 0910 Auxiliary Mode 1-12 8911 Auxiliary Relay Time 0-255 10912 Auxiliary Lock Relay Mode 0-1 0913 Auxiliary REX Input Mode 0-3 0914 DOTL Time 0-255 30915 Auto Relock Enabled 0-1 0920 Backlighting Brightness 0-6 6921 Key Press Indication 0-3 3922 Key Time Out 5-30 10923 Tamper Sensitivity 0-3 2931 Lockout after invalid codes 0, 3-99 0932 Lockout time 1-10 5933 Latching override enable 0, 2-3 0934 Latching override cancelled by code use 0-3 0935 Lockout of Standard Users via code 0, 2-3 0961 Code Length (1) 0, 3-8 0969 Reset keypad to factory defaults (1) 246 -999 New installer code - -(1) These settings require their new values to be confirmed by enteringthe current installer code then after the normal programmingsequence. 961 (or 969) Exit Installer ModeTo exit installer mode press
