Nidek Medical LEX-DRILL Service Manual
                                                                                              | |
Contents
| 
5 - 2LHM2A*RDA001A/E5.3 Covers* Turn off the power switch and disconnect the power cord.1. Right cover (44101-M202) and left cover (44101-M203)Unscrew SB4 × 6 (n = 2 for each) to remove the right cover (44101-M202) and left cover(44101-M203).2. Top cover ASSY. (44101-2100)Disconnect the cable connector (44101-CA06) from the cable connector (44101-CA21).Press down the drill detachment button (44101-M306).Open the processing chamber door. Unscrew SB4 × 6 (n = 4) to remove the washer (44101-M206) and the top cover ASSY. (44101-2100).3. Protect plate (44101-M104)Unscrew SB4 × 6 (n = 4) to remove the protect plate (44101-M104).4. Cover (44101-M103)Unscrew SB4 × 6 (n = 4) to remove the cover (44101-M103).5. Dustproof plate (44101-M102)Remove the waste bin (44101-M205) from the sheet magnet. Unscrew SB4 × 6 (n = 4) toremove the dustproof plate (44101-M102).2SB4×64SB4×64SB4×64SB4×62SB4×62SB4×62SB4×62031103410432055 1025 2021-2100441012Processing chamber door30622062 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine