LHM2A*RDA001A/E7 - 207.5 Processing7.5.1 Drill tool anglePurpose: Adjusting drill tool angle in the Lex Dril(Internal data for drill adjustment (drill tool angle) → Parameter → Parameter setting → Drilltool angle)Jig: Plastic/flat lens1. Drill a lens.1) Press while pressing .Call up the internal data for drill adjustment(drill tool angle). [Lex 1000]2) Set a plastic/flat lens in the Lex 1000. Close the lens chuck, then press . [Lex 1000]3) When lens shape measurement is completed, remove the lens and set it in the Lex Drill.4) Press the START button to drill the lens.Hole 1: Angle -0.6, Length 1.0 ( s l o t )The angles of holes 1 to 7 increase from-0.6 to +0.6 in increments of 0.2 .(Front surface)Internal data for drill adjustment (drill tool angle)Hole 4: Angle 0.0, Length 1.0 ( s l o t )Hole 7: Angle +0.6, Length 1.0 ( s l o t )
