Nidek Medical LEX-DRILL Service Manual
                                                                                              | |
Contents
| 
LHM2A*RDA001A/E6 - 510. Disconnect all cable connectors from thecarriage ASSY. (44101-5000).11. Unscrew SB5 × 20 (n = 2) to remove the shaftholders [44101-M105 (n = 2)] and carriageASSY. (44101-5000).12. Reassemble the parts in reverse order.1) Check rattle adjustment of the S axis(see 7.3.2).2) Calibration of the shading plate positionis necessary (see 7.4.1).3) C h u c k p r e s s u r e a d j u s t m e n t i snecessary (see 7.3.1).6.6 V Axis Motor ASSY.Replacement part: V axis motor ASSY. (44101-5200)1. Remove the right cover (44101-M202), leftcover (44101-M203), top cover ASSY. (44101-2100), and washer (44101-M206) (see 5.3).2. Disconnect the cable connector (P202) fromthe pulse motor (44101-E018).3. Unscrew SB3 × 8 (n = 4) and 3PW3 (n = 4) toremove the feed nut (44101-M557).4.Unscrew SB5 × 10 (n = 3) to remove the Vaxis motor ASSY. (44101-5200).5. Reassemble the parts in reverse order.1) Check rattle adjustment of the V axis(see 7.3.5).2) Calibration of the shading plate positionis necessary (see 7.4.1).2SB5×202105-500044101-5200441013SB5×104SB3×83PW3 4557 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine