Nidek Medical LEX-DRILL Service Manual
                                                                                              | |
Contents
| 
LHM2A*RDA001A/E6 - 126.21 Rocker SwitchReplacement part: Rocker switch (80460-00130)1. Remove the right cover (44101-M202), leftcover (44101-M203), top cover ASSY. (44101-2100), and washer (44101-M206) (see 5.3).2. Open the board holder (44101-M182) alongwith the main board (44101-BA01) (see 6.17).3. Disconnect all cable connectors from therocker switch (80460-00130).4. Remove the rocker switch while pressing itsclasp.6.22 Fuse Holder and Connector RS-232CReplacement parts: Fuse holder (80401-00133), Connector RS-232C (44101-CA04)1. Remove the right cover (44101-M202), leftcover (44101-M203), top cover ASSY. (44101-2100), and washer (44101-M206) (see 5.3).2. Open the cable holder(44101-M183) andboard holder (44101-M182) along with themain board (44101-BA01) (see 6.17).3. Disconnect the cable connector from the fuseholder (80401-00133) and connector RS-232C (44101-CA04).4. Remove the fuse holder while pressing itsclasp.5. Remove the connector locks [80453-03279 (n= 2)] and connector RS-232C (44101-CA04).6.23 FanReplacement part: Fan (41971-CA07)1. Remove the right cover (44101-M202), leftcover (44101-M203), top cover ASSY. (44101-2100), and washer (44101-M206) (see 5.3).2. Open the cable holder (44101-M183) andboard holder (44101-M182) along with themain board (44101-BA01) (see 6.17).3. Disconnect the cable connector (CN01R) fromthe fan (41971-CA07).4. Unscrew PC4 × 25 (n = 4) to remove the fan.80460-00130CA0480401-0003380453-0327924PC4×25CA07 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine