Nikon COOLPIX P7700 User Manual

Also see for CoolPix P7700: Reference manual

Contents

103Recording MoviesRecording and Playing Back MoviesB Notes on Using Zoom During Movie Recording• The zoom indicator is not displayed during movie recording.• The camera can zoom up to 2× with digital zoom during movie recording.• When the digital zoom is used, the image quality will deteriorate. When the movie options settingis f HD 720p (1280×720) and g VGA (640×480), the digital zoom can be used up to1.55× and 2×, respectively without causing the image quality deteriorate.• If you start recording a movie without using digital zoom, and you keep rotating the zoom controltoward g, the zoom stops at the maximum optical zoom ratio. Remove your finger from the zoomcontrol and then rotate it again toward g to activate digital zoom. When movie recording ends,digital zoom is cancelled.• When Shooting mode (A108) of the movie custom setting mode is set to Aperture-priorityauto or Manual, optical zoom cannot be used during movie recording.B Note on Recording Images and Saving MoviesThe indicator showing the number of exposures remaining or the indicator showing the maximummovie length flashes while images are being recorded or while a movie is being saved. Do not openthe battery-chamber/memory card slot cover or remove the battery or memory card while anindicator is flashing. Doing this could result in loss of data, or in damage to the camera or thememory card.B Notes on Movie Recording• When saving a movie onto a memory card, a memory card with an SD speed class of Class 6 orhigher is recommended (A21). If the transfer speed of the card is slow, the movie recording mayend unexpectedly.• The sounds of zoom control operation, zoom, autofocus, vibration reduction or aperture controlwhen the brightness changes may be recorded.• The following phenomena may be seen on the monitor screen while recording movies. Thesephenomena are saved in the recorded movies.- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting- Subjects that move quickly from one side of the frame to the other, such as a moving train or car,may appear skewed- The entire movie image may be skewed when the camera is panned- Lighting or other bright areas may leave residual images when the camera is moved• The flash does not fire.B Notes on the Camera Temperature• The camera may become warm when recording movies for an extended period of time or whenthe camera is used in a hot area.• When the temperature inside the camera becomes extremelyhigh during movie recording, the camera may automatically stoprecording to prevent internal damage to the camera. A 10-secondcountdown indicator (B10s) appears on the monitor, and thenthe camera will turn off after 5 seconds.7m23s7m23s7m23s