F3TroubleshootingTechnical Notes and IndexDate and time ofrecording are notcorrect.• If the camera clock has not been set (“Date not set” indicatorflashes during shooting), still pictures have a time stamp of“00/00/0000 00:00”; and movies are dated “01/01/12 00:00.” Setthe correct date and time using Time zone and date in thesetup menu.• The camera clock is not as accurate as a normal clock, such aswatches. Check camera clock regularly against more accuratetimepieces and reset as required.24, 110,E69110,E69No informationdisplayed inmonitor.Shooting and photo information may be hidden. Press the sbutton until shooting information or photo information isdisplayed.9Print date notavailable. Time zone and date in the setup menu has not been set. 24, 110,E69Date notappearing onpictures evenwhen Print date isenabled.• A shooting mode that does not support print date is selected.• Another function that is set now is restricting the print date.• The date cannot be imprinted onto a movie.110, E7279–Screen for settingtime zone anddate is displayedwhen camera isturned on.Clock battery is exhausted; all settings were restored to theirdefault values. 25Camera settingsreset.Reset filenumberingcannot be done.Reset file numbering cannot be applied when the foldernumber reaches 999 and there are images in the folder. Changethe memory card, or format the internal memory/memory card.113,E87Monitor is turnedoff, and the power-on lamp flashesquickly.Battery temperature is high. Turn off camera, and allow battery tocool down before resuming use. After the lamp flashes for 3minutes, the camera turns off automatically, but you can alsopress the power switch to turn it off manually.23Cameratemperature rises.When functions such as movie recording or sending imagesusing an Eye-Fi card are used for a long time, or when the camerais used in a location with a high ambient temperature, thecamera temperature may rise. This is not a malfunction.103Problem Cause/Solution A
