Reference SectionE96Eye-Fi UploadB Notes About Eye-Fi Cards• Note that images will not be uploaded if signal strength is insufficient even ifEnable is selected.• Remove your Eye-Fi card from the camera where wireless devices are prohibited.Signals may be transmitted even if Disable is selected.• Refer to the instruction manual of your Eye-Fi card for more information. In theevent of malfunction, contact the card manufacturer.• The camera can be used to turn Eye-Fi cards on and off, but may not support otherEye-Fi functions.• The camera is not compatible with the Endless Memory function. When it is set ona computer, disable the function. If the Endless Memory function is enabled, thenumber of images taken may not be displayed correctly.• Eye-Fi cards are for use only in the country of purchase. Observe all local lawsconcerning wireless devices.• Leaving the setting as Enable will result in the battery being depleted in a shorterperiod of time.C Eye-Fi Communication IndicatorThe communication status of the Eye-Fi card in the camera can be confirmed in themonitor (A14).• w: Eye-Fi upload is set to Disable.• x (lights): Eye-Fi upload enabled; waiting to begin upload.• x (flashes): Eye-Fi upload enabled; uploading data.• z: An error occurred. The camera cannot control the Eye-Fi card.Press the d button M z tab (A13) M Eye-Fi uploadOption Descriptionb Enable(default setting)Upload images created by the camera to a preselecteddestination.c Disable Images are not uploaded.
