Reference SectionE1074 Aim the transmitter at the infraredreceiver on the front of thecamera (A1) and press thetransmission button.• Press the transmission button from adistance of 5 m (16 ft) or less.• In the quick-response remote mode, oncethe subject is in focus, the shutter isreleased.• When the time for self-timer is set to Z 10s(10 seconds) or Z 2s (2 seconds), the self-timer lamp flashes when thesubject is in focus, and then about 1 second before the shutter is released,the lamp stops flashing and remains lit. To stop the self-timer before animage is taken, press the transmission button again.• In the self-timer remote control mode, the remote control mode is set to Z(quick-response remote) when the shutter is released.Replacing the Battery for Remote Control ML-L3 (3VCR2025 Lithium Battery)• When changing the remote control battery, make sure that the battery’s positive(+) and negative (–) terminals are oriented correctly.• Make sure to read and follow the warnings of “For Your Safety” (Avii).B Notes About the Remote Control• The remote control may not function even from a distance of 5 m (16 ft) or lesswhen shooting in backlit conditions.• The setting may not be changed when using certain settings of other functions.C More InformationSee “Self-timer: After Release“ (E78) for more information.
