Reference SectionE108With this camera, various functions are available in combination with theSpeedlight (external flash unit) supported by the Nikon Creative LightingSystem (CLS) (E109). Use the Speedlight when the built-in flash cannotprovide sufficient lighting.The following Speedlights and wireless Speedlight commander can be used forthe camera.* Speedlight used for remote flash. Attachment Ring SX-1 cannot be mounted onthis camera. To use the SB-R200, it must be attached to the Speedlight Stand AS-20.How to Attach the Speedlight/Wireless SpeedlightCommander• Do not raise the built-in flash.• Remove the accessory shoe cover fromthe camera.• Refer to the documentation providedwith your Speedlight/wirelessSpeedlight commander for moreinformation on how to attach anddetach the Speedlight with a lockingpin and other details.• Attach the accessory shoe cover whenthe accessory shoe is not in use.• Attempting to attach an accessory thatdoes not support this camera maydamage the camera and the accessory.B Use Only Nikon Flash AccessoriesUse only Nikon Speedlights. Flash units of other manufacturers (with voltages over250 V applied to the camera's X sync contact, or causing short circuit at the accessoryshoe contact) could not only prevent normal operation, but damage the synccircuitry of the camera or flash.Speedlights (External Flash Unit)Speedlights SB-910, SB-900, SB-800, SB-700, SB-600,SB-400, SB-R200*Wireless Speedlight commander SU-800
