Connecting to Network InterfacesNokia 105s Gateway Installation Guide 37Table 7 Pin Assignments for AUX Connector and Modem CableConnecting to Network InterfacesConnect at least one network interface to use as the Network Voyager systemmanagement interface. This interface is configured during the system startupprocedure, as described in Chapter 3, “Performing the Initial Configuration.”You can also connect the remaining LAN interface cables at this point,although you are not required to do so.To connect Ethernet devices Use a straight-through RJ-45 cable to connect to a 10-Mbps or 100-Mbpshub. Use a crossover RJ-45 cable to connect directly to a host.For details, see “Ethernet NIC Connectors and Cables” on page 61.Auxiliary Port(DTE)RJ-45 to RJ-45 RolloverCableRJ-45 to DB-25Modem Adapter ModemSignal RJ-45 Pin RJ-45 Pin DB-25 Pin SignalRTS 1 8 4 RTSDTR 2 7 20 DTRTxD 3 6 3 TxDGND 4 5 7 GNDGND 5 4 7 GNDRxD 6 3 2 RxDDSR 7 2 8 DCDCTS 8 1 5 CTS
