Using Nokia Network VoyagerNokia 105s Gateway Installation Guide 43Using Nokia Network VoyagerUse Nokia Network Voyager to configure and monitor your gateway. Foradditional information about how to use Network Voyager, see “ViewingNokia IPSO Documentation by Using Nokia Network Voyager” later in thissection.To open Nokia Network Voyager1. Open a Web browser on the host you plan to use to configure or monitoryour gateway.2. In the Location or Address field, enter the IP address of the initialinterface you configured for the gateway.You are prompted to enter the admin username and the password youentered when you performed the initial configuration.NoteIf the username login screen does not open, you might not have aphysical network connection between the host and your gateway, oryou might have a network routing problem. Confirm the informationyou entered during the initial configuration and check that all cablesare firmly connected. For more information, see the troubleshootingsection in the installation guide for your gateway.
