Two-Port Fiber-Optic Gigabit Ethernet Network Interface CardNokia 105s Gateway Installation Guide 67Figure 16 Two-Port Fiber-Optic Gigabit Ethernet NICFiber-Optic Gigabit Ethernet Connectors and CablesTo connect the two-port Gigabit Ethernet NIC to other network components,use a multimode, fiber-optic cable with an LC connector for each NICinterface. The destination end of the cable can be either LC or SC, dependingon the type of connector required for the destination Gigabit Ethernet device.You can also use a half-duplex LC-to-LC cable to loop back the transmit portof an interface to the receiver port.Two LC-to-SC cables are included with two-port fiber-optic Gigabit EthernetNICs. You can order additional cables from a cable vendor of your choice.00206GIGELink LEDs (solid green)Activity LEDs (blinking yellow)Ports
