5 Connecting PMC Network Interface Cards66 Nokia 105s Gateway Installation GuideTo connect the 105s gateway to other network components, you can orderappropriate adapter cables separately from a cable vendor of your choice.Two-Port Fiber-Optic Gigabit Ethernet NetworkInterface CardAll NICs installed in a 105s are installed into slots on the gateway. GigabitEthernet NICs can occupy any of the slots or subslots in a gateway that otherNICs do not occupy.Fiber-Optic Gigabit Ethernet NIC FeaturesThe two-port fiber-optic Gigabit Ethernet NIC provides the followingfeatures: Supports traffic at 1000 Mbps High bandwidth Full-duplex mode operation up to 1 Gbps (no half-duplex support) Link speed auto advertising Packet tracing for analysis through tcpdump Compliance with IEEE 802.3z Gigabit Ethernet specificationYou can configure and monitor Ethernet interfaces with Nokia NetworkVoyager, the Web-based element management interface to Nokia gateways.Specifically, you set the port speed and full-duplex mode with NetworkVoyager.Figure 16 shows the front panel details for the two-port fiber-optic GigabitEthernet NIC you use in the 105s gateway.
