3 Performing the Initial Configuration40 Nokia 105s Gateway Installation GuideUsing a Console ConnectionIf you have not already done so, you need to connect to the console port tocomplete the initial configuration. For information about console connections,see “Connecting to the Console or Auxiliary Port” on page 32.Before you perform the initial configuration, you might gather the followinginformation, which can be useful during the configuration process: What is the hostname? What is the admin password? Will you use Nokia Network Voyager for subsequent configuration? Which interface will you use? What is the assigned IP address and masklength? What is the default router? What is the interface speed?NoteThe default interface speed for the 105s is 1000 Mbps.You can make VLAN, SNMP community string, and remote loggingconfiguration choices at this time, although you can change them later.To perform the initial configuration1. Press the power switch to the “on” position to turn on power to thegateway.00527Power switchCooling fans
