Nokia 7302 Basics, Management And Oam Manual

Also see for 7360 Intelligent Services Access Manager FX Series: Guide User guide User guide Service manual Service schematics

Contents

Nokia 7302 Basics, Management And Oam Manual Manual pdf 100 page image

Monitor Commands100"FD 100/320Gbps NT and FX NT IHub SystemBasics, Management and OAM Guide"3HH-11982-AAAA-TQZZA Issue: 105.3.4.7 neighborTable 102 neighbor commandSample output:A:ALA-12>monitor>router# ospf neighbor 10.0.0.104 interval 5 repeat 3 absolute============================================================================Monitor statistics for OSPF Neighbor 10.0.0.104============================================================================At time t = 0 sec (Base Statistics)----------------------------------------------------------------------------Bad Nbr States : 0 LSA Inst fails : 0Bad Seq Nums : 0 Bad MTUs : 0Bad Packets : 0 LSA not in LSDB : 0Option Mismatches: 0 Nbr Duplicates : 0----------------------------------------------------------------------------At time t = 5 sec (Mode: Absolute)----------------------------------------------------------------------------Bad Nbr States : 0 LSA Inst fails : 0Bad Seq Nums : 0 Bad MTUs : 0Bad Packets : 0 LSA not in LSDB : 0Option Mismatches: 0 Nbr Duplicates : 0----------------------------------------------------------------------------Item DescriptionSyntax neighbor interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |rate]Context monitor>router>ospfDescription This command displays statistical OSPF or OSPF3 neighbor information at the configuredinterval until the configured count is reached.The first screen displays the current statistics related to the specified neighbor(s). Thesubsequent statistical information listed for each interval is displayed as a delta to the previousdisplay.When the rate keyword is specified, the “rate per second” for each statistic is displayed insteadof the delta.Monitor commands are similar to show commands but only statistical information displays.Monitor commands display the selected statistics according to the configured number of timesat the interval specified.Parameters neighbor ip-address — Displays damping information for entries received from the BGPneighbor. Up to 5 IP addresses can be specified.interval seconds — Configures the interval for each display in seconds.Default: 10 secondsValues: 5 — 60repeat repeat — Configures how many times the command is repeated.Default: 10Values: 1 — 999absolute — When the absolute keyword is specified, the raw statistics are displayed, withoutprocessing. No calculations are performed on the delta or rate statistics.rate — When the rate keyword is specified, the rate-per-second for each statistic is displayedinstead of the delta.