Nokia 7302 Basics, Management And Oam Manual

Also see for 7360 Intelligent Services Access Manager FX Series: Guide User guide User guide Service manual Service schematics

Contents

Nokia 7302 Basics, Management And Oam Manual Manual pdf 23 page image

"FD 100/320Gbps NT and FX NT IHub SystemBasics, Management and OAM Guide"System ManagementIssue: 10 3HH-11982-AAAA-TQZZA 233 System Management3.1 In this Chapter3.2 Saving Configurations3.3 Configuring System Management with CLI3.4 System Management CLI Command Reference3.5 System Management CLI Commands3.1 In this ChapterThis chapter provides information about configuring basic system managementparameters.Topics in this chapter include:• Saving Configurations• Configuring System Management with CLI• System Management CLI Command Reference• System Management CLI Commands3.2 Saving ConfigurationsWhenever configuration changes are made, the modified configuration must besaved so they will not be lost when the system is rebooted.Configuration files can be saved as follows:• by executing an explicit command syntax admin save• an autonomous save occurs between 10 and 20 minutes after the lastconfiguration has been done on the system• as part of a general NE database backupThe configuration files can also be saved in a special protected database directoryusing the command admin software-mngt ihub database (save-protected).The following files are saved:• the configuration file• the index file, containing internal numbering used to make an identical copy of theswitch configuration after the save.