"FD 100/320Gbps NT and FX NT IHub SystemBasics, Management and OAM Guide"System ManagementIssue: 10 3HH-11982-AAAA-TQZZA 313.5.1.6 shutdownTable 10 shutdown command3.5.1.7 user-user-hairpinTable 11 user-user-hairpin command3.5.1.8 vlan-dot1q-etypeTable 12 vlan-dot1q-etype commandItem DescriptionSyntax [no] shutdownContext configure>system>time>ntpDescription The shutdown command administratively disables the entity. When disabled, an entity doesnot change, reset, or remove any configuration settings or statistics. Many entities must beexplicitly enabled using the no shutdown command.The shutdown command administratively disables an entity. The operational state of theentity is disabled as well as the operational state of any entities contained within. Many objectsmust be shut down before they may be deleted.Unlike other commands and parameters where the default state is not indicated in theconfiguration file, shutdown and no shutdown are always indicated in system generatedconfiguration files.The no form of the command puts an entity into the administratively enabled state.Default shutdownItem DescriptionSyntax [no] user-user-hairpinContext configure>system>Description This command allows the operator to configure user-to-user communication between ONTsconnected to the same LT (Hair-Pinning).The no form of the command disables user-to-user communication.Default no user-user-hairpinItem DescriptionSyntax vlan-dot1q-etype etypeno vlan-dot1q-etype(1 of 2)
