Events and Logs114"FD 100/320Gbps NT and FX NT IHub SystemBasics, Management and OAM Guide"3HH-11982-AAAA-TQZZA Issue: 106.6.3.1 Configuring an Event LogA event log file contains information used to direct events and debug information totheir respective destinations. One or more event sources can be specified.Use the following CLI syntax to configure an event log:configure>loglog-id log-iddescription description-stringfilter (log destination) filter-idfrom {[main] [security] [change] [debug-trace]}to sessionno shutdownThe following displays a log file configuration example:ALA-12>configure>log>log-id# info----------------------------------------------...log-id 2description "This is a test log file."filter (log destination) 1from main securityexit...----------------------------------------------ALA-12>configure>log>log-id#6.6.3.2 Configuring Event ControlUse the following CLI syntax to configure event control.configure>logevent-control application-id [event-name|event-number]generate [severity-level]The following displays an event control configuration:A:ALA-12>configure>log# info#------------------------------------------echo "Log Configuration"#------------------------------------------event-control "ospf" 2003 generate clearedevent-control "ospf" 2014 generate critical..----------------------------------------------A:ALA-12>configure>log>filter#6.6.3.3 Configuring a Log FilterUse the following CLI syntax to configure a log filter:
