"FD 100/320Gbps NT and FX NT IHub SystemBasics, Management and OAM Guide"Monitor CommandsIssue: 10 3HH-11982-AAAA-TQZZA 83----------------------------------------------------------------------------Ing. Matches: 0 Egr. Matches : 0----------------------------------------------------------------------------At time t = 15 sec (Mode: Rate)----------------------------------------------------------------------------Ing. Matches: 0 Egr. Matches : 0============================================================================A:ALA-1>monitor>filter#5.3.2 LAG Commands5.3.2.1 lagTable 94 lag commandSample output:Item DescriptionSyntax lag lag-id [lag-id...(up to 5 max [interval seconds] [repeat repeat] [absolute | rate]Context monitorDescription This command monitors traffic statistics for Link Aggregation Group (LAG) ports. Statisticalinformation for the specified LAG ID(s) displays at the configured interval until the configuredcount is reached.The first screen displays the current statistics related to the specified LAG ID. The subsequentstatistical information listed for each interval is displayed as a delta to the previous display.When the rate keyword is specified, the “rate per second” for each statistic is displayed insteadof the delta.Monitor commands are similar to show commands but only statistical information displays.Monitor commands display the selected statistics according to the configured number of timesat the interval specified.Parameters lag-id — The number of the LAG.Default: none — The LAG ID value must be specified.Values: 1 — 64interval seconds — Configures the interval for each display in seconds.Default: 10 secondsValues: 5 — 60repeat repeat — Configures how many times the command is repeated.Default: 10Values: 1 — 999absolute — When the absolute keyword is specified, the raw statistics are displayed, withoutprocessing. No calculations are performed on the delta or rate statistics.rate — When the rate keyword is specified, the rate-per-second for each statistic is displayedinstead of the delta.
