manuals
database
Your AI-powered manual search engine
Search
Home
Brands
Nokia
Software
Network Voyager
Nokia IPSO 4.0 Reference Manual
Print this manual
Download
Nokia IPSO 4.0 Reference Manual
Also see for Network Voyager:
Reference guide
Table of content
Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
About the Nokia Network Voyager Reference Guide
Conventions This Guide Uses
Menu Items
About Network Voyager
Logging In to Network Voyager
Obtaining a Configuration Lock
Navigating in Network Voyager
Viewing Hardware and Software Information for Your System
Configuring Interfaces
IP2250 Management Ports
Configuring IP Addresses
Interface Status
Configuring Tunnel Interfaces
Ethernet Interfaces
Link Aggregation
Managing Link Aggregation Using SNMP
Static Link Aggregation
Configuring Link Aggregation
Gigabit Ethernet Interfaces
Point-to-Point Over Ethernet
Configuring MSS Clamping
FDDI Interfaces
ISDN Interfaces
Configuring Calling Line-Identification Screening
Dial-on-Demand Routing (DDR) Lists
ISDN Network Configuration Example
ISDN Troubleshooting
Token Ring Interfaces
Token Ring Example
Point-to-Point Link over ATM
ATM Example
IP over ATM (IPoA)
IPoA Example
Serial (V.35 and X.21) Interfaces
Serial Interface Example
T1(with Built-In CSU/DSU) Interfaces
T1 Interface Example
E1 (with Built-In CSU/DSU) Interfaces
HSSI Interfaces
Unnumbered Interfaces
Configuring OSPF over Unnumbered Interface
Cisco HDLC Protocol
Point-to-Point Protocol
Frame Relay Protocol
Loopback Interfaces
GRE Tunnels
GRE Tunnel Example
High Availability GRE Tunnels
DVMRP Tunnels
DVMRP Tunnel Example
ARP Table Entries
Configuring ARP for ATM Interfaces
Transparent Mode
Transparent Mode Processing Details
Configuring Transparent Mode in VPN Environments
Example of Transparent Mode
Configuring Transparent Mode
Monitoring Transparent Mode Groups
Virtual Tunnel Interfaces (FWVPN) for Route-Based VPN
Creating Virtual Tunnel Interfaces
Configuring System Functions
Configuring DHCP Client Interfaces
Configuring the DHCP Server
DHCP Server Configuration
Changing DHCP Service
Enabling or Disabling DHCP Address Pools
Creating DHCP Client Templates
Configuring Dynamic Domain Name System Service
Configuring the Domain Name Service
Using an Optional Disk (Flash-Based Systems Only)
Mail Relay
System Failure Notification
Sending Mail
Configuring Host Addresses
Configuring System Logging
Configuring Logging on Flash-Based Systems
Configuring Audit Logs
Remote Core Dump Server on Flash-Based Systems
Changing the Hostname
Scheduling Jobs
Backing Up and Restoring Files
Creating Backup Files
Transferring Backup Files
Restoring Files from Locally Stored Backup Files
Managing Nokia IPSO Images
Installing New Images
Testing a New Image
Upgrading Nokia IPSO Images for a Cluster
Configuring Monitor Reports
Managing Packages
Advanced System Tuning
Router Alert IP Option
Virtual Router Redundancy Protocol (VRRP)
Understanding Monitored-Circuit VRRP
Selecting Configuration Parameters
Before you Begin
Configuring Monitored-Circuit VRRP
Configuring VRRPv2
Configuring Check Point NGX for VRRP
Configuring VRRP Rules for Check Point NGX
Link Aggregation (IP2250 Systems Only)
Monitoring the Firewall State
Firewall Policies
Switched Environments
Configuring Clustering
Example Cluster
Cluster Management
Cluster Terminology
Clustering Modes
Considerations for Clustering
Protocol Network
For All Upgrades
Creating and Configuring a Cluster
Selecting the Cluster Mode
Configuring an Interface
Configuring Firewall Monitoring
Configuring Join-Time Shared Features
Making the Cluster Active
Recommended Procedure
Joining a System to a Cluster
Using Cluster Voyager
Synchronizing the Time on Cluster Nodes
configuring ntp
Configuring NGX for Clustering
Clustering Example (Three Nodes)
Configuring the Cluster in Voyager
Configuring the Internal and External Routers
Clustering Example With Non-Check Point VPN
Configuring SNMP
SNMP Proxy Support for Check Point MIB
Using the Check Point MIB
Enabling SNMP and Selecting the Version
Configuring the System for SNMP
Configuring Traps
Interpreting Error Messages
Configuring SNMPv3
Request Messages
Configuring IPv6
Interfaces
IPv6 and IPv4 Compatibility
Configuring IPv6 to IPv4
Configuring IPv4 in IPv6 Tunnels
Routing Configuration
Creating Redistributed Routes
Router Discovery
VRRP for IPv6
Using VRRPv3
Setting a Virtual MAC Address for a Virtual Router
Changing the IP Address List of a Virtual Router in VRRPv3
Creating a Virtual Router in Monitored Circuit Mode for IPv6
Virtual Router for IPv6
Traffic Management
Security and Access Configuration
Managing Security and Access
Managing User Accounts
Adding and Deleting Users
Managing and Using S/Key
Managing Groups
Role-Based Administration
Managing Roles
Assigning Roles and Access Mechanisms to Users
Creating Cluster Administrator Users
Configuring Network Access and Services
Configuring a Modem on COM2, COM3, or COM4
Configuring Nokia Network Voyager Access
Configuring Basic Nokia Network Voyager Options
Generating and Installing SSL/TLS Certificates
Secure Shell (SSH)
Initial SSH Configuration
Configuring Advanced Options for SSH
Configuring Secure Shell Authorized Keys
Changing Secure Shell Key Pairs
Managing User RSA and DSA Identities
Tunneling HTTP Over SSH
Enabling Enabling or Disabling Session Management
Authentication, Authorization, and Accounting (AAA)
Configuring RADIUS
Configuring TACACS
Deleting an AAA Authentication Server Configuration
Changing an AAA Configuration
Deleting an AAA Configuration
Enabling Encryption Accelerator Cards
Using PKI
IPSec Parameters
Creating an IPSec Policy
Creating an IPSec Tunnel Rule
Transport Rule
IPSec Tunnel Rule Example
IPSec Transport Rule Example
Endpoint of an IPSec Tunnel
Miscellaneous Security Settings
Configuring Routing
Route Maps
Types of Areas
Area Border Routers
Configuring OSPF
Virtual IP Address Support for VRRP
Configuring RIP
Configuring RIP Timers
Configuring Auto-Summarization
Configuring Virtual IP Support for VRRP
Configuring Dense-Mode PIM
Disabling PIM
Setting Advanced Options for Dense-Mode PIM (Optional)
Configuring Sparse-Mode PIM
Configuring High-Availability Mode
Candidate Rendezvous Point
Configuring a PIM-SM Static Rendezvous Point
Setting Advanced Options for Sparse-Mode PIM (Optional)
Debugging PIM
IGRP
Generation of Exterior Routes
Aliased Interfaces
DVMRP
Configuring DVMRP
IGMP
Configuring IGMP
Static Routes
Adding and Managing Static Routes Example
Backup Static Routes
Route Aggregation Example
Route Rank
Routing Protocol Rank Example
Support for BGP-4
BGP Sessions (Internal and External)
BGP Multi-Exit Discriminator
Inbound BGP Route Filters
Route Reflection
Confederations
EBGP Multihop Support
Route Dampening
BGP Support for Virtual IP for VRRP
BGP Support for IP Clustering
BGP Neighbors Example
Path Filtering Based on Communities Example
BGP Multi Exit Discriminator Example
Changing the Local Preference Value Example
BGP Confederation Example
Route Reflector Example
BGP Community Example
EBGP Load Balancing Example: Scenario #1
EBGP Load Balancing Example: Scenario #2
Adjusting BGP Timers Example
TCP MD5 Authentication Example
BGP Route Dampening Example
BGP Path Selection
Route Redistribution
Redistributing Routes to BGP
Redistributing Routes to RIP and IGRP
Redistributing OSPF to BGP Example
Redistributing Routes with OSPF
Inbound Route Filters
BGP Route Inbound Policy Example
BGP AS Path Filtering Example
Configuring Traffic Management
Traffic Queuing Description
Configuring ACL Rules
Modifying a Rule
Configuring Aggregation Classes
Configuring Queue Classes
Configuring ATM QoS
Configuring Common Open Policy Server
Configuring a COPS Client ID and Policy Decision Point
Assigning Roles to Specific Interfaces
Activating and Deactivating the COPS Client
Example: Rate Shaping
Example: Expedited Forwarding
Configuring Router Services
Configuring BOOTP/DHCP Relay
IP Broadcast Helper
Router Discovery Overview
Network Time Protocol (NTP)
Configuring NTP
Monitoring System Configuration and Hardware
Disk and Swap Space
IPSO Process Management
Generating Monitor Reports
Monitoring System Health
Monitoring System Logs
Viewing Cluster Status and Members
Viewing Routing Protocol Information
Displaying Interface Settings
Using the iclid Tool
Preventing Full Log Buffers and Related Console Messages
Index
Nokia Network Voyager
for IPSO 4.0
Reference Guide
Part No. N451818001 Rev A
Published October
2005
Next
/ 510
Zoom view
Related manuals for Nokia Network Voyager
Nokia IPSO IP350 Install Manual
Nokia HERE User Manual
Nokia E61 User Manual
Nokia E66 User Manual
Nokia 5500 User Manual
Nokia NetMonitor Manual
Nokia 6360 User Manual
Nokia N86 8MP User Manual
Nokia 3320, 3360 User Manual
Nokia Drive 3 User Manual
This manual is suitable for:
Network Voyager
IPSO 4.0
manuals
database
Your AI-powered manual search engine
