7274Nokia Network Voyager for IPSO 4.0 Reference Guide5.Scroll through the New Contributing Protocol List click the protocol you want to use for thenew aggregate route.6.Click Apply.7.Click Save to make your changes permanent.8.Click On in the Contribute All Routes from field.9.(Optional) To specify an IPv6 prefix, enter the IPv6 address and mask length in the textboxes in the Prefix for New Contributing Route from field.10.Click Apply, and click Save to make your changes permanent.Creating Redistributed RoutesRedistributing Static Routes into RIPng1.Click IPv6 Route Redistribution under Configuration > System Configuration > IPv6Configuration > Routing Configuration in the tree view.2.Click Static Routes.3.To redistribute all currently valid static routes into RIPng, click the On button in theRedistribute All Statics in the RIPng field.4.Enter a value in the Metric text box for the metric cost that the created RIPng routes willhave.5.Click Apply.6.Click Save to make your changes permanent.7.To redistribute a specific static route or routes into RIPng, click On next to the IPv6 interfacefor the static route to redistribute to RIPng.8.Enter a value in the Metric text box for the metric cost that the created RIPng route(s) willhave.9.Click Apply.10.Click Save to make your changes permanent.Redistributing Aggregate Routes in RIPng1.Click IPv6 Route Aggregation under Configuration > System Configuration > IPv6Configuration > Routing Configuration in the tree view.2.To redistribute all currently valid aggregate routes into RIPng, click On in the Redistributeall Aggregates into RIPng field.3.Enter a value in the Metric text box for the metric cost that the created RIPng routes willhave4.Click Apply.5.Click Save to make your changes permanent.
