10466 Nokia Network Voyager for IPSO 4.0 Reference Guide5. Click Apply.6. Click Save to make your changes permanent.Example: Expedited ForwardingThis example illustrates the combined use of the Access Control List, Traffic Conditioning, andQueuing features.This example demonstrates how to improve the response time to Telnet sessions between clientand server systems over a private WAN connection within a corporate intranet as shown in thediagram below. The WAN interfaces for Network Application Platform (Nokia Platform) A andfor Network Application Platform (Nokia Platform) B are ser-s3p1. The following configurationis done both on Nokia Platform A and Nokia Platform B.1. Save the current configuration on each Nokia Platform before you set up QoS. Doing soallows you to compare the relative performance of the QoS and non-QoS configurations.a. Click Configuration Sets under Configuration > System Management in the tree view.b. Enter pre-QoS in the Save Current State to New Configuration Database edit box.c. Click Apply, and then click Save to make your change permanent.2. Create an Aggregation Classa. Click Aggregation Class under Configuration > Traffic Management in the tree view.b. Enter wan_1_ef in the Name edit box in the Create a New Aggregation Class section.c. Enter 100 in the Mean Rate (Kbps) edit box.d. Enter 5000 in the Burstsize (bytes) edit box.e. Click Apply, and then click Save to make your Changes permanent.3. Create a Queue Classa. Click Queue Class link under Configuration > Traffic Management in the tree view.b. Enter wan_1_ef in the Create a New Queue Class edit box.c. Click on the link to wan_1_ef in the Existing Queue Classes section to view existingqueue class values.00045ClientServerLAN LANWAN LinkNokiaPlatform A NokiaPlatform B
