My own71Copyright © 2006 Nokia. All rights reserved.Connection settings:Domain—Enter the domain name obtained from yourservice provider.Access point name—Enter the push-to-talk access pointname. The access point name is needed to establish aconnection to the GSM/GPRS network.Server address—Enter the IP address or domain name ofthe push-to-talk server obtained from your serviceprovider.User name—Enter your user name obtained from yourservice provider.Password—Enter a password, if required, to make a dataconnection. The password is usually provided by the serviceprovider and is often case-sensitive.Log in to push to talkPress , and select My Own > Push to talk. Push to talkautomatically logs in to the service when started.When log in is successful, push to talk automaticallyconnects to groups that were active when the applicationwas last closed. If the connection is lost, the deviceautomatically tries to log back in until you choose to exitpush to talk.Exit push to talkSelect Options > Exit. Switch Push to talk off afterexiting application? is displayed. Select Yes to keep theapplication active on the background or No to log out andclose the service.If several applications are open and you want to switchfrom one application to another, press and hold .Make a one-to-one callSelect Options > PTT contacts.Scroll to the contact you want to talk to from the list andselect Options > Talk 1 to 1.Press and hold the entire time you are talking. Whenyou have finished talking, release .You must end the one-to-one call before you can create anew call. Select Disconnect or press .Tip! Remember to hold the device in front of youduring a push-to-talk call so you can see the display.Speak towards the microphone, and do not cover theloudspeaker with your hands.Answer a one-to-one callPress to start a one-to-one call or to dismissthe call.
