A CCESS G ATEWAY46 Installing the Access GatewayConfigurationNote: The WAN port of the AG must be connected to a live network that can access theInternet in order to retrieve the license key from the license key server.Log in by typing admin then password: admin. Type (y)es when prompted to configuresettings. The initial minimal WAN port configuration mode will be displayed as shown inFigure 1.Ready. Press enter to login.NSELogin: admin Password: ***** NO LICENSE KEY HAS BEEN ENTERED. A LICENSE KEY MUST BE ENTEREDIN ORDER TO PROCEED WITH INSTALLATION.SEE USER'S GUIDE FOR LICENSE KEY INFORMATION.INSTALLATION WILL NOW TRY TO CONTACT THE NOMADIX LICENSE KEY SERVER.IN ORDER TO PROCEED, THE NSE MUST BE ABLE TO CONNECT TO THE INTERNET.DO YOU WANT TO CONFIGURE THE NSE'S IP AND DNS SETTINGS? [yes/no]: yConfiguring minimal WAN interface connectivity parameters:Configuration Mode [static] (static, dhcp, pppoe) :Figure 1: Initial minimal WAN port configuration.Select the desired configuration mode and use the following steps to configure the WANport for either Static IP, DHCP client or PPPoE.Step 1a: Static WAN IP ConfigurationAccept static as the default configuration mode and enter the following mandatorysettings shown in Figure 2.Configuring minimal WAN interface connectivity parameters:Configuration Mode [static ] (static, dhcp, pppoe) :IP Address [10.0.0.10 ] : Your WAN IP address
