A CCESS G ATEWAY62 Installing the Access GatewayYou will now see the Nomadix location configuration page. Enter contact data and agree to theNomadix End User License Agreement. Your license will be retrieved when you enter “y”. TheNSE will then reboot to activate your license settings.Enabling the Logging Options (recommended)System logging creates log files and error messages generated at the system level. AAAlogging creates activity log files for the AAA (Authentication, Authorization, and Accounting)functions. You can enable either of these options.When system logging is enabled, the standard SYSLOG protocol (UDP) is used to send allmessage logs generated by the Access Gateway to the specified server.1. Enter log (logging) at the Configuration menu. The system displays the current loggingstatus (enabled or disabled).2. Enable or disable the system and/or AAA logging options, as required. If you enable eitheroption, go to Step 3, otherwise logging is disabled and you can terminate this procedure.Although the AAA and billing logs can go to the same server, we recommend thatthey have their own unique server ID number assigned (between 0 and 7). Whenmanaging multiple properties, the properties are identified in the log files by theirIP addresses.
