Nortek 2GIG GC3 Installation And Programming Manual

Also see for 2GIG GC3: User guide User guide Installation and programming guide User guide

Contents

Nortek 2GIG GC3 Installation And Programming Manual Manual pdf 41 page image

Copyright © 2019 Nortek Security & Control LLC 412. Under Sensor Reports, choose Enabled orDisabled.Wireless Zone <###>—Sensor Reports3. Tap ▼.Step 12: Enable or Disable Sensor SupervisionNext, turn the Sensor Supervised option ON or OFF.When enabled, the feature is ON and the GC3 Panelchecks for regular, wireless transmissions from thesensor or peripheral. If the GC3 Panel doesn’t receive atransmission from the sensor after a set amount of time, thesystem issues a loss of supervision trouble report. Whendisabled, the feature is OFF.Note: Because portable sensors (for example, the PanicButton Remote) are frequently moved out of the system’srange when users leave the premises, always disable theSensor Supervised for panic buttons. A sensor will stillreport to the Central Station with supervision disabled.1. At the Wireless Zone <###> screen, highlightSensor Supervised.2. Under Sensor Supervised, choose Enabled orDisabled.3. Tap ▼.Wireless Zone <###>—Sensor SupervisedStep 13: Choose a ChimeNext, select the desired chime for the sensor or peripheral.1. At the Wireless Zone <###> screen, highlightSensor Chime.2. Choose the desired chime from the Sensor Chimelist. The default setting is Disabled.Wireless Zone <###>—Sensor ChimeNext StepsYou have finished programming a wireless zone. You cannow choose one of these options:» To program the next wireless zone, tap NextZone and repeat the programming steps foranother sensor. The system keeps track of allyour programming changes and prompts you topermanently save all your changes as a group whenyou exit the System Configuration menu.» To program the next wireless zone, tap uu|. Thisbutton becomes visible and available only whenprogramming the last setting for a zone.» To erase all of the settings you just programmed forthe zone, tap Reset Zone.» To permanently save the settings you justprogrammed, tap Return to System Confi guration.Then tap . At the Confirm Changes screen, tapSave.