Copyright © 2019 Nortek Security & Control LLC785. (Optional) At the Listening for New Devices toAdd screen, tap Rename.Listening for Devices to Add—Rename6. At the Enter a name for this device screen, use thetouchscreen keypad to enter a new device name.For example, enter “Living Room Dimmer”.Enter a name for this device7. Tap Done.The system reveals the new name on the Listening forDevices to Add screen.Listening for Devices to Add—New Device NameFrom the Listening for Devices to Add screen, you cancontinue by triggering the next desired device and thenrenaming it as needed.8. Tap to return to the Smart Home Settingsmenu.Remove a DeviceTo remove a device from the network:1. Navigate to the Smart Home Settings menu. See“Navigate to the Smart Home Settings Menu.”2. At the Smart Home Settings menu, tap RemoveDevices.Smart Home Settings—Remove DevicesThe Listening for Devices to Remove screen appears.Listening for Devices to Remove—Remove Devices Now3. Walk to and trigger the device on the network. Forexample, if you are removing a Z-Wave light bulb,turn the light bulb ON.Tip: Typically, you can trigger a device on thenetwork by either powering the device OFF/ON,pressing a button once or twice, or flipping a switchon the device. Every device is different.
