Nortek 2GIG GC3 Installation And Programming Manual

Also see for 2GIG GC3: User guide User guide Installation and programming guide User guide

Contents

Nortek 2GIG GC3 Installation And Programming Manual Manual pdf 79 page image

Copyright © 2019 Nortek Security & Control LLC 79When the system successfully removes the device, itappears on the Listening for Devices to Remove screen.Listening for Devices to Remove—Device RemovedTip: The Control Panel issues a double-beep whena device is successfully removed to the network.4. Tap to return to the Smart Home Settingsmenu.Check the NetworkUse the Check Network feature to scan the smart homenetwork for unresponsive nodes. This can take severalminutes and some of the smart home functions will beunavailable until the check is complete.To perform a network check:1. Navigate to the Smart Home Settings menu. See“Navigate to the Smart Home Settings Menu.”2. At the Smart Home Settings menu, tap CheckNetwork.Smart Home Settings—Check Network3. At the Check Network screen, tap Start.Check Network—StartThe system scans the network for unresponsive nodes andindicates the status of each scanned node.Check Network—Status4. When the Check Network is complete you can seethe status of nodes in the network.5. Tap to return to the Smart Home Settingsmenu.Rediscover the NetworkAfter adding or removing devices from the network, the finalstep is to rediscover the network. This updates the system’scommunication routes so it communicates with the newlyadded and previously added Z-Wave devices.To rediscover the network:1. Navigate to the Smart Home Settings menu. See“Navigate to the Smart Home Settings Menu.”