Nortel 1000 Installation And Configuration Manual

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Nortel 1000 Installation And Configuration Manual Manual pdf 100 page image

100 Before configuring TM 3.0553-3001-230 Standard 10.01 September 2007• “Integrating TM 3.0 with ONMS” on page 169• “Integrating TM 3.0 with HP OpenView” on page 187Testing the connectionUse the following procedures to test the connection between TM 3.0 and yourequipment. For detailed instructions on adding sites and systems, see “Setting up systemdata” on page 108.ELAN subnet requiredThe Embedded LAN (ELAN) network interface must be configured and devices mustbe connected to the ELAN subnet before you can test the connection (refer to AppendixA, “Typical configurations” on page 293.Setting up communications informationProcedure 13Setting up communications information1 Double-click Sample Site in the TM 3.0 Navigator window.2 Click Sample System, and then choose File > Properties.3 The System Properties dialog box appears with the General tab selected.4 Click Communications tab.5 Click Add.The Add Communications Profile dialog box appears. See Figure 40.Figure 40Add Communications Profile dialog box