172 Integrating TM 3.0 with ONMS553-3001-230 Standard 10.01 September 2007Run oitInstall for each .oit file, one at a time. The .mib file must be present in the samedirectory when oitInstall is executed. See step 5 under “Checklist for installing theOptivity Integration Toolkit.”Checklist for installing the Optivity Integration ToolkitThis section provides general information about OIT. Refer to the NTPs, release notes,and read me files that are provided with your ONMS software package for specificinformation about OIT.OIT files for TM 3.0 can be installed on any platform that runs ONMS as long as itsupports the Java Runtime Environment required by TM 3.0 Web applications. In thiscase, follow the steps in this section.In the case of co-residence, you must understand the prerequisites and install TM 3.0.TM 3.0 installation takes automatically performs the OIT integration steps. Steps 1through 6, as shown in Procedure 36, are then not required.Checklist for a TM 3.0 installation on an existing ONMS serverProcedure 36Checking the current configuration1 Log in to ONMS as Administrator.2 Check for the environment variable LNMSHOME.View environment variables using the System option in Control Panel on theEnvironment Variables tab. This variable holds the path of the Optivity installation(typically, c:\Optivity\NMS). All the executables are located in c:\Optivity\NMS\bin.3 Check for the environment variable OITHOME.This environment variable points to the Optivity Integration Toolkit home directory(typically, C:\Optivity\oit). If unable to find OITHOME, create it.4 Copy TM 3.0 OIT files to the appropriate subdirectories in OITHOME.All of the subdirectories under \Optivity\Oit\ on the TM 3.0 CD-ROM are copied toOITHOME.5 Run LNMSHOME\bin\oitinstall -u <full path of TM 3.0 OIT file> for every.oit file in theCND Directory, where -u indicates to upgrade ONMS. If the -u parameter is notspecified, only a syntax check is performed on the OIT file.This command updates the ONMS database with the new definitions.
