132 Chapter 3 Configuring Quality of Service (QoS) with the Web-based Management InterfaceScreen Section Field DescriptionPorts Displays the port or interface number.Precedence Displays total number of masksconsumed from QoS application.Filters Consumed Displays total number of filtersconsumed from QoS application.Meters Consumed Displays total number of metersconsumed from QoS application.Counters Consumed Displays total number of countersconsumed from QoS application.Non QoS Filters Consumed Displays the current number of filtersin use, not due to installed filter data,for a given precedence level andinterface.Non QoS Meters Consumed Displays the current number of metersin use, not due to installed policydata, for a given predecence level andinterface.Filters Total Displays the maximum number offilters available (for each precedenceand for each ASIC).Meters Total Displays the maximum number ofmeters available (for each precedenceand for each ASIC).Counters Total Displays the maximum numberof counters available (for eachprecedence and for each ASIC).QoS ResourceAllocation TableRange Checkers Consumed Displays the number of rangecheckers consumed by QoSapplication.Minimum Value Enter the minimum variable for anyQoS range (such as VLANS, L4Source Port, L4 Destination Port).Maximum Value Choose the maximum end variable forany QoS range from the list.Rule Value Displays the corresponding rule valuein the IRULE entry in hardware.QoS Valid RangeMask Value Displays the corresponding maskvalue in the IMASK entry in hardware.Nortel Ethernet Routing Switch 4500 SeriesConfiguration — Quality of ServiceNN47205-504 (322816-B) 03.01 Standard5.1 23 November 2007Copyright © 2007, Nortel Networks.
