58 Chapter 2 Configuring Quality of Service (QoS) with the CLIqos l2-element commandThe qos l2-element command adds Layer 2 elements.The syntax for the qos l2-element command isqos l2-element <1-55000> [src-mac ][src-mac-mask][dst-mac ][dst-mac-mask][vlan-min vlan-max][vlan-tag | untagged>][ethertype][priority ]"qos l2-element parameters" (page 58) outlines the parameters for thiscommand.qos l2-element parametersParameter Description<1-55000> Enter an integer to specify the element ID;range is 1 to 55000.src-mac Specify the source MAC element criteria. Enterin the format H.H.H.src-mac-maskSpecify the source MAC mask element criteria.Enter in the format H.H.H.dst-mac Specify the destination MAC element criteria.Enter in the format H.H.H.dst-mac-maskSpecify the destination MAC mask elementcriteria. Enter in the format H.H.H.vlan-min Specify the VLAN ID minimum value elementcriteria. Range is 1 to 4094.vlan-max Specify the VLAN ID maximum value elementcriteria. Range is 1 to 4094.vlan-tag Specify the VLAN tag classifier criteria:• untagged• taggedThe default is Ignore.Nortel Ethernet Routing Switch 4500 SeriesConfiguration — Quality of ServiceNN47205-504 (322816-B) 03.01 Standard5.1 23 November 2007Copyright © 2007, Nortel Networks.
