Configuring QoS Elements, Classifiers, and Classifier Blocks 59Parameter Descriptionethertype Enter the Ethernet type in the form of 0xXXXX,for example, 0x0801.Default is ignore.priority Enter the 802.1p priority values; range from 0to 7 or all.Default is ignore.The qos l2-element command is executed in the Global Configurationcommand mode.ATTENTIONA Layer 2 element referenced in a classifier cannot be deleted.no qos l2-element commandThe no qos l2-element command deletes Layer 2 element entries.The syntax for the no qos l2-element command isno qos l2-element <1-55000>Substitute <1-55000> above with the ID of the element to be deleted.The no qos l2-element command is executed in the GlobalConfiguration command mode.qos classifier commandThe qos classifier command facilitates the linking of individual IP andL2 classifier elements into a single classifier.The syntax for the qos classifier command isqos classifier <1-55000> set-id <1-55000> [name] element-type {ip | l2 | system} element-id<1-55000> [session-id <1-4294967295>]"qos classifier parameters" (page 60) outlines the parameters for thiscommand.Nortel Ethernet Routing Switch 4500 SeriesConfiguration — Quality of ServiceNN47205-504 (322816-B) 03.01 Standard5.1 23 November 2007Copyright © 2007, Nortel Networks.
