Configuring QoS Access Lists 47[src-mac ][src-mac-mask][dst-mac ][dst-mac-mask][vlan-min vlan-max ][vlan-tag | untagged>][ethertype ][priority ][drop-action {enable | disable}][update-dscp <0 - 63>][update-1p <0 - 7>][set-drop-prec {high-drop | low-drop}][block ]"qos l2-acl parameters" (page 47) outlines the parameters for this command.qos l2-acl parametersParameter Descriptionname The name assigned to this access list.src-mac address>The source MAC address to use for this access list.src-mac-mask mac_address_mask>The source MAC address mask to use for this accesslist.[dst-mac mac_address>]The destination MAC address to use for this accesslist.dst-mac-maskddress_mask>The destination MAC address mask to use for thisaccess list.vlan-min vlan-max The minimum and maximum VLANs to use with thisaccess list. Both values must be specified.vlan-tag untagged>Specify the VLAN tag classifier criteria:• untagged• taggedThe default is Ignore.ethertype The Ethernet protocol type to use with the access list.priority The priority value to use with this access list. Validrange is 0-7 or all.Nortel Ethernet Routing Switch 4500 SeriesConfiguration — Quality of ServiceNN47205-504 (322816-B) 03.01 Standard5.1 23 November 2007Copyright © 2007, Nortel Networks.
