112 VLAN advanced configurationNN47928-500NN47928-500Variable definitionsThe following table describes the variables and values for configuring the basic VLAN settings.VLAN port settings configuration parametersYou can associate a VLAN ID to a port for port-based VLAN classification.The following section describes the parameters for configuration of the VLAN port settingslocated at Configuration, VLAN setup, Port Settings tab.Variable definitionsThe following table describes the variables and values for configuring the VLAN port settings.Variable ValueDynamic VLAN Learning Specifies the Dynamic VLAN learning status.Select Enable to enable the global GARP VLAN Registration Protocol(GVRP) status.Select Disable to disable the global GVRP status.If the status is disabled, then the GVRP is disabled for the current port.The default value is Enable.Dynamic Multicast Learning Specifies the Dynamic Multicast learning status.If the status is disabled, then the GMRP is disabled for the current port.The default value is Enable.Protocol Based VLAN Specifies the protocol-based learning status.The default value is Enable.Variable ValuePort Displays the port ID for which you want to configure the VLAN portsettings.Port Name Type the name of the port.Port and Protocol Based VLAN Specifies the port and protocol-based VLAN status.Select Enable – the protocol grouping in VLAN is enabled.Select Disable – the protocol grouping in VLAN is disabled.The VLAN classification on a port will be port and protocol-based as longas the port and protocol-based classification is enabled globally for thedevice.The default value is Enable.PVID Type the port VLAN ID.Acceptable Frame Types Specifies the acceptable frame types as Tagged or All.Select Tagged – the switch discards untagged and priority- tagged framesreceived on the port and processes only the VLAN tagged frames.Select All – the switch accepts all frames, including untagged frames orpriority-tagged frames received on the port.The default value is All.
