197Configuration GuidePort management advanced configurationThis section describes the configuration for Ethernet ports for Business Service Gateway (BSG).• The following table describes the variables and values for configuring Ethernet portcontrol. (page 198)Prerequisites for port management advanced configuration• You must have SYSTEM - READ WRITE permission to access port managementconfiguration.Ethernet ports configurationThe following section describes configuration of Ethernet ports.Ethernet ports configuration navigation• Basic port settings configuration parameters (page 197)• Port control configuration parameters (page 198)Basic port settings configuration parametersThe following section describes the parameters for the configuration of basic port settings locatedat Configuration, Port Management, Ethernet, Basic Settings tab.Variable definitionsThe following table describes the variables and values for configuring Ethernet basic port settings.Variable ValueSelect Select the Ethernet port you want to configure.Port Displays the Ethernet port number.Port Status Select the administrative status of the Ethernet port.Select Up to enable the administrative status of the port.Select Down to disable the administrative status of the port.Link Status Displays the link status of the Ethernet port. One of the following isdisplayed:• Up – indicates the physical link is connected.• Down – indicates the physical link is disconnected.Port Type This field is available only when Port Status is Down.Select the port type. Select Switch Port or Router Port.
