VPN configuration 57Configuration Guide1 From the BSG navigation pane, select Configuration, VPN, VPN Settings.The VPN Global Settings pane appears.2 From the Remote Identity Type list, select IPV4, FQDN, EMAIL, or KEYID.3 In the Remote Identity Value list, type the value corresponding to the selectedRemote Identity Type.4 In the PreShared Key field, type a string of text which is the key that VPN usesto authenticate before receiving any other credentials.5 Click Add.EndVariable definitionsThe following table describes the variables and values for configuring VPN global settings.Configuring usersComplete the following procedure for each remote user.Procedure stepsStep Action1 From the BSG navigation pane, select Configuration, VPN, Users.The Database for VPN Remote Users pane appears.2 In the User Name field, type the user name.3 In the Password field, type the password.4 Click Apply.EndVariable ValueRemote Identity Type The user identity type that uniquely identifies the peer. Select one of thefollowing:• IPV4 - specifies the IP address• FQDN- specifies the fully qualified domain name (an unambiguousdomain name that denotes the position of the node in the DNS treehierarchy)• EMAIL - specifies the email of the peer• KEYID - specifies the string that uniquely identifies the peerRemote Identity Value Type the value corresponding to the selected Remote Identity Type.PreShared Key Type a string of text which is the key that VPN uses to authenticatebefore receiving any other credentials.
