Using the BayStack 450 10/100/1000 Series Switch3-70 309978-D Rev 01Figure 3-28. MultiLink Trunk Utilization Screen (2 of 2)Table 3-24 describes the MultiLink Trunk Utilization screen fields.Table 3-24. MultiLink Trunk Utilization Screen FieldsField DescriptionTrunk Column header for the read-only fields in this screen. The read-only data displayed inthis column indicates the trunk (1 to 6) that corresponds to the switch ports specifiedin the Port field.Traffic Type Allows you to choose the traffic type to be monitored for percent of bandwidthutilization (see Range).Default Rx and TxRange Rx and Tx, Rx, TxUnit/Port Lists the trunk member ports that correspond to the trunk specified in the Trunkcolumn. The (Unit/) extension to the Port column name appears only when the switch(unit) is part of a stack configuration. It indicates that the ports in this row areassociated with the specified unit number configured in the Unit field.(continued)MultiLink Trunk UtilizationTrunk Traffic Type Unit/Port Last 5 Minutes Last 30 Minutes Last Hour----- ------------- --------- -------------- --------------- ---------5 [ Rx and Tx ] 8/22 45.0% 35.0% 50.0%8/23 55.0% 25.0% 70.0%6 [ Rx and Tx ] 3/2 65.0% 30.0% 55.0%[ Rx and Tx ] 1/2 45.0% 50.0% 35.0%[ Rx and Tx ] 7/2 25.0% 40.0% 50.0%[ Rx and Tx ] 5/6 75.0% 80.0% 55.0%Press Ctrl-P to display utilization for trunks 1-4.Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
