Using the BayStack 450 10/100/1000 Series Switch3-136 309978-D Rev 01LogoutThe Logout option (accessed from the main menu) allows you to terminate thesession from a password-protected console terminal or from an active TELNETsession.The Logout option works as follows:• If you are accessing the BayStack 450 switch through a TELNET session, theLogout option terminates the TELNET session.• If you are accessing the BayStack 450 switch through a password-protectedconsole terminal (connected to the console/comm port on the switch), theLogout option displays the console-terminal password prompt (Figure 3-58).If RADIUS authentication is enabled, the Password field is preceded by aUsername field. You must enter the correct password (and username, ifapplicable) to access the CI screens.Figure 3-58. Password Prompt ScreenYou can specify whether a password is required for the TELNET session or theconsole terminal using the Console/Comm Port Configuration screen(see “Console/Comm Port Configuration” on page 3-100).If the console terminal is not password protected, the system ignores the Logoutoption.BayStack Model 450-24T HW:Revx FW:Vx.xx SW:Vx.x.x.x ISVN:xPassword: [ *************** ]Enter Password:
