Using the Console Interface309978-D Rev 01 3-79IGMP ConfigurationFigure 3-33 shows an example of the IGMP Configuration screen in a stackedconfiguration (when installed as a standalone switch, the screen does not displaythe Unit # field designation).Switch ports 8 and 14 of unit 1, ports 2 and 6 of unit 2, and port 16 of unit 4 areconfigured to receive all IP multicast-related traffic. The configured ports areVLAN port members of VLAN 5, and are called Static Router Ports.Choose IGMP Configuration (or press g) from the IGMP Configuration Menu toopen the IGMP Configuration screen.Table 3-28. IGMP Configuration Menu OptionsOption DescriptionIGMP Configuration... Displays the IGMP Configuration screen (see “IGMP Configuration” followingthis table). This screen allows you to set up IGMP configurations.Display Multicast GroupMembership...Displays the Multicast Group Membership screen (see “Multicast GroupMembership” on page 3-83). This screen allows you to view all IP multicastaddresses that are active in the current LAN.Return to SwitchConfiguration MenuExits the IGMP Configuration Menu and displays the Switch ConfigurationMenu.Note: Before configuring your switch for IGMP snooping, see “IGMPSnooping Configuration Rules” on page 1-73.
