53CallPilot Mini/CallPilot 150 Installation and Maintenance GuideChapter 8Backing up and restoring CallPilotUsing the CallPilot tools, you can:• back up CallPilot information• restore CallPilot information• retrieve the CallPilot log filesTo use these features, you must install the CallPilot Backup and Restore Utility on your computer.Installing the CallPilot Backup and Restore UtilityTo install the CallPilot Backup and Restore Utility:1 Load the CallPilot CD in the CD-ROM drive of your computer.2 Open the CD folder and open the Optional Software folder.3 Open the BRU Utility folder.4 Copy the file CallPilotBRU.exe to a folder on your computer.5 Remove the CallPilot CD from your computer.Backing up the CallPilot informationBacking up the CallPilot information is a method of protecting your CallPilot programming, voicemessages and greetings. When you back up CallPilot, you make a copy the CallPilot informationand store it in a directory on your computer. If your CallPilot Mini/CallPilot 150 must be replacedor loses its programming, you can restore this back up information to yourCallPilot Mini/CallPilot 150.Note: You must have Windows 95 or later installed on your computer to run the CallPilotBackup and Restore Utility.Note: Nortel Networks recommends that you perform a back up after you have completedyour initial programming. We also recommend that you back up on a regular basis to savenew programming, greetings and voice messages.You must install the CallPilot Backup and Restore Utility on the computer you are using toback up the CallPilot information.
