Chapter 9 Transferring calls 67CallPilot Reference GuideSetting up Outbound TransferTo set up Outbound Transfer to a phone numberAdding special characters to a destination numberPress Description¤ or DIGS to resume adding digits to the destination phone number‹or PAUS to enter a timed pause that appears as P on the display. Pauses are four seconds long.› to recognize dial tone (behind PBX). The Recognize Dial Tone special characterappears as D on the display.fior OTHR # to enter a #flor OTHR * to enter a *TONE to recognize dial tone (behind PBX). The Recognize Dial Tone special characterappears as D on the display.• to cancel and retry1 Press ≤ ·°⁄.Follow the voice prompts or the display button options to openyour mailbox.2 If you use the CallPilot interface:• Press °‚ to open the Mailbox Options• Press ·• Press ‹ to open the Outbound Transfer menu• Go to step 3If you use the Norstar Voice Mail interface:• Press ADMIN or °• Press ° to open the Outbound Transfer menu• Go to step 33 Press ADMIN or ⁄ to set up Outbound Transferorif you have previously set up Outbound Transfer press CHNG.4 Press PHONE to select an external phone as the destination.5 Enter the destination phone number and press OK or £.Outbound xfrADMIN SELECTDestination:PHONE EXTPh:RETRY OK
