Chapter 5 Understanding the Remote Set tool 59ICS Remote Tools User GuideRemote Set tool command buttonsYou can perform the following functions with the three buttons found at the top of theRemote Set tools screen.Using the keyboardWhen you program the ICS using the simulated telephone, you can use the computer keyboard toenter information. Keyboard entry is usually faster than using the mouse to click the simulatedtelephone buttons in the window, and is more like using a real telephone.Pressing F1 on the keyboard displays a list of the keyboard entry mappings, which are listed in thefollowing table.Following are some of the rules around using the keyboard when the Remote Set tool is active.Refer to Figure 28.ï All letters, all numbers including those on the numeric keypad on your computer, some or allfunction buttons, and the symbols * and # are recognized and translated to the equivalentbutton presses on the simulated telephone appearing in the window after you enter theprogramming session.ï Keyboard entry keys are not case-sensitive. No distinction is made between upper and lowercase.ï The keyboard F keys are mapped to program sequences or keys that do not have a directkeyboard equivalent. For instance, pressing F7, which is the equivalent of Feature **266344(CONFIG) starts the configuration programming. F6, which is the equivalent of the Releasekey, exists the programming session.ï When entering telephone and line names, letter buttons on the keyboard are interpreted asnumbers. On the telephone keypad, notice that the 2 button, for example, lists the letters A, B,and C above it, and that all the number buttons except 0 have letters listed above them.Pressing A on the keyboard is interpreted as a 2. Pressing B is interpreted as two 2s. PressingC is interpreted as three 2s, and so on.ï Use number buttons for entering sequences such as **266344 (CONFIG).Table 3 Remote Set tool command buttonsButton label Description of functionM7310 or M7324 To change the screen from one telephone simulation to another, clickthe M7310/M7324 button that appears at the top, left of the RemoteSet screen. The button displays the telephone model that is notcurrently displayed.Change Password You can use the Remote Set screen to change the password for theRAD you are connected to.WARNING: Make a note of the password in a secure location. If youlose the password, the RAD cannot be reactivated.Exit Use to close the window and return to the Customer Info screen.
