Chapter 7 Using Workbooks and off-line programming 85ICS Remote Tools User GuideConfiguring a workbookThe ICSRT supplies default workbooks that reflect the different types of Norstar software, fromversion 2.0 forward. Within these workbooks, there are further system definitions and settings thatneed to be set before you use the workbook to program a system.This section contains information about:ï ìAccessing an assigned workbookî on page 85ï ìConfiguring the Workbook parametersî on page 86Accessing an assigned workbookIf you created a customer record and assigned a default workbook, you can use the SelectWorkbook heading under the ICSRT Run Tool menu to select and open the workbook so that youcan configure the workbook to the system parameters.1 Select the customer record on the Customer Info screen to which you assigned the record.2 From the Run Tool menu, click Select Workbook.A For your information dialog may display, reminding you to save multiple copies of theworksheets. This dialog only displays if Do not show this dialog in future checkbox on thedialog remains unchecked. Click on OK.A default Windows Open dialog appears, showing all the Excel workbook files that areassociated with the Norstar Customer record you selected (Figure 39).Figure 39 Windows Open screen3 Select the workbook you want to work with.4 Click on Open.5 Go to ìConfiguring the Workbook parametersî on page 86 and configure the workbook withthe system configuration.
