INM Release 4.1 Planning Guide PG OC 98-13 Issue 1.2147 of 202Integrated Network ManagementBroadband Release 4.1 EngineeringConsiderationsINM Engineering RulesThe Integrated Network Management Broadband engineering considerationsfor Release 4.1 are as follows:1 For an OPC graphical user interface session on the INM Broadband, it isrequired that the connection between OPC and the INM Broadband be atEthernet LAN speed (10 Mbit/s).2 For the INM Broadband connectivity to a WAN, the minimal bandwidthfor the WAN communication link is 56 Kbits/sec. The recommendedbandwidth is 1.544 Mbits/sec (DS1).3 For an OPC connectivity to the INM Broadband, the minimalrecommended bandwidth for the communication link is 56 Kbits/sec.4 High speed traffic display for BLSR, is only available for ADMs in thesame span of control.5 INM Broadband can display threshold crossings only if the thresholdcrossings are provisioned as alarms. Threshold crossings provisioned asalerts or not provisioned at all, are not displayed.INM Engineering CapacitiesThe workstation hardware platforms of choice for Integrated NetworkManagement Broadband Release 4.1 are:• HP9000 Model C200• HP9000 Model B132L+
