Notifier AFP-3030 Programming Manual

Also see for AFP-3030: Operation manual Installation manual Operation manual Installation manual

Contents

Notifier AFP-3030 Programming Manual Manual pdf 25 page image

AFP-3030 Programming Manual — P/N DOC-01-032:A 26/06/2015 19Section 3: PrealarmProgram3.1 General InformationThe AFP-3030 operates with two levels of programming: Program, and Alter Status.Program level allows change to the essential control panel functions such as point functions, systemfunctions, and passwords. Program level change requires the master password, or a user passwordthat allows access to the Program level. All password information can be changed with a masterpassword only.Alter Status level allows change to operating parameters, such as detector sensitivity, or time/date,or Walk Test. The master password, or a user password that allows access to the Alter Status level,is required.To access the Program level, press the Program/Alter Status soft key on the Main Menu and at theprompt enter a master password, or a user password that allows access to the Program level. Thefollowing screen will display.Figure 3.1 Program/Alter Status ScreenPress a soft key with the word “program” in its menu to bring up the associated program menu.When programming the panel for the first time, press the DELETE PROGRAM MENU soft key,which brings up the Delete Program Menu screen (Refer to Figure 3.57). Press the CLEAR ALLPROGRAMMING button, then ACCEPT, to ensure that the panel is set to defaults and clear ofprograms.NOTE: All events except faults are annunciated during programming. When an annunciatedevent occurs, the panel will automatically exit the programming screen and the Event Countsmenu screen will appear.NOTE: No program menus will display if a user password is entered that has access to AlterStatus level only: the Alter Status menu will be the sole menu choice.L A K E V I E W G E N E R A L H O S P I T A LS Y S T E M N O R M A L1 0 : 2 2 : 3 4 A T U E J A N 2 5 , 2 0 1 1P R O G R A M / A L T E R S T A T U SA L T E R S T A T U S M E N U D E L E T E P R O G R A M M E N UA U T O P R O G R A M M E N UP A N E L P R O G R A M M E N UP O I N T P R O G R A M M E N U B A C KNOTE: Clearing all programs is not necessary when initial programming with a databasedownloaded from VeriFire™ Tools.