OHAUS 7000 Series Instruction Manual

Also see for 7000 Series: Instruction manual Service manual Instruction manual

EN 104 7000 SERIES INDICATORSCommentsThe serial number response is the content of the terminal serial number variable (#301) as entered in setup.S – SEND STABLE WEIGHT VALUECommand: SResponse: S_S_ _ _ _ _ 436.2_lb436.2 stable displayed weightlb weight unitResponse: S_I Command understood, not executable at present.Response: S_+ Terminal in overload range.Response: S_- Terminal in underload range.CommentsThe terminal will wait for up to 3 seconds after receiving an “S” command for no-motion. If motion does not settlewithin this time, the command is aborted and the S_I response is sent.SI – SEND WEIGHT VALUE IMMEDIATELYCommand: SIResponse: S_S_ _ _ _ _ 436.2_lb Stable weight value.Response: S_D_ _ _ _ _ 436.2_lb Non-stable (dynamic) weight value.Response: S_I Command understood, not executable at present.Response: S_+ Terminal in overload range.Response: S_- Terminal in underload range.CommentsThe response to the command SI is the last internal weight value (stable or dynamic) before receipt of the “SI”command.SIR – SEND WEIGHT VALUE IMMEDIATELY AND REPEATCommand: SIRResponse: S_S_ _ _ _ _ 436.2_lb Stable weight value.Response: S_D_ _ _ _ _ 436.2_lb Non-stable (dynamic) weight value.Response: S_I Command understood, not executable at present.Response: S_+ Terminal in overload range.Response: S_- Terminal in underload rangeExampleCommand: SIRResponse: S_D_ _ _ _ _ 129.07_kgS_D_ _ _ _ _ 129.09_kg