7000 SERIES INDICATORS EN 3Table 1-3: T72XW Power ConsumptionInput Voltage I (mA) P (W)5V/50 Hz 167 7.9110 V/50 Hz 133 7.7240 V/50 Hz 64 7.9264 V/50 Hz 59 7.985 V/60 Hz 163 7.9110 V/60 Hz 128 7.7240 V/60 Hz 62 7.9264 V/60 Hz 58 8.0Values shown are with internal Ethernet option installed and load cell input loaded with 8 x 350 load cells.1.4 Definition of Signal Warnings and SymbolsSafety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoringthe safety notes may lead to personal injury, damage to the instrument, malfunctions and false results.Signal WordsWARNING for a hazardous situation with medium risk, possibly resulting in injuries or death if notavoided.CAUTION for a hazardous situation with low risk, resulting in damage to the device orthe property or in loss of data, or injuries if not avoided.Attention For important information about the productNote For useful information about the productWarning SymbolsGeneral Hazard Electrical Shock Hazard1.5 Safety Precautions Verify that the input voltage range printed on the data label and the plug type matches the local AC powerto be used. Only connect models supplied with a grounded power cord to a compatible grounded power receptacle. Do not position the terminal such that it is difficult to disconnect the power cord from the power receptacle. Make sure that the power cord does not pose a potential obstacle or tripping hazard. Use only approved accessories and peripherals. Operate the equipment only under ambient conditions specified in these instructions. Disconnect the equipment from the power supply when cleaning. Do not operate the equipment in hazardous or unstable environments. Service should only be performed by authorized personnel.Caution: Read all safety warnings before installing, making connections, or servicing thisequipment. Failure to comply with these warnings could result in personal injury and/orproperty damage. Retain all instructions for future reference.